Cathelco BWT system receives AMS approval for full range of salinities
Cathelco have received Alternate Management Systems (AMS) acceptance from the U.S. Coast Guard for their ballast water treatment system, the company said in its press release.
AMS acceptance is a temporary designation given to ballast water treatment systems approved by a foreign administration. It enables BWT systems to be used on vessels for a period of up to five years, while the treatment system undergoes approval testing to Coast Guard standards.
“This is an important milestone in achieving full U.S. Coastguard Type Approval. It means that vessels fitted with our system can go anywhere in the world without restriction”, said Peter Smith, sales director of Cathelco Ltd.
The Cathelco system received IMO Type Approval earlier this year and is based on a combination of filtration and UV technology.
As one of the new generation of BWT systems tested to the latest and more rigorous IMO Approval standards, the Cathelco system can operate effectively in the most challenging water conditions.
The AMS approval recognises that the system will continue to disinfect heavily silted seawater where UV light transmittance values are as low as 45% (75% being the value for normal seawater) at 190 Joules per square metre.
IMO Type Approval for the system was attained in April from BSH and the Flag Administration of Germany. It was preceded by land based testing at the NIOZ facility in Holland and shipboard testing on the M.V. Eddystone, a ro-ro vessel owned by Foreland Shipping.
Although the Cathelco BWT system is based on well established processes - a combination of filtration and UV technology – it has a number of innovative features which set it apart from its competitors. One of the most important features is that it is completely chemical free including the cleaning method.
Cathelco BWT units are available with capacities from 34m3/hr to 2,400m3/hr.In order to maintain its effectiveness, the system automatically adjusts to different sea water qualities. Unlike some systems which simply measure turbidity (amount of suspended sediment), the Cathelco system uses a UVT sensor to measure UV light transmittance – the amount of UV radiation actually passing through the seawater. This is a far more reliable parameter for calculating the UV dose as well as ensuring that power is used economically. Another important factor is the use of stepless power control, again ensuring that power is used as economically as possible.
The space saving UV chambers are some of the smallest on the market. Each unit is a twin chamber with only two lamps (100m3/hr per lamp) and is designed to make the sea water flow along one side and then the other – doubling UV exposure. In addition, the manifolds make the water flow in a helix, ensuring that the maximum surface area is exposed to the UV light source.
An innovative cleaning system using special cleaning balls is used to remove residue from the quartz sleeves and internal surfaces of the chamber. This means that the system does not use chemicals and there are no mechanical parts to scratch the surface of the sleeves.